What You Should Know About This Year

The Importance of Colors of Underground Utility Lines

It is now easier to know what an underground utility line is for. However, a long time ago, it was difficult to identify these utility lines and so when people try to dig there were many risks involved. There is reduced risks today because of new methods of identifying utility lines although not a complete reduction. In order to prevent harm, it is important to know or identify these utility lines if your need to dig the ground. Before digging through a certain piece of land, the OSHA requires that the underground utilities be located. Otherwise it can be something disastrous. Fatal injuries can happen if underground utility lines are struck. The location of the areas where the lines were struck can experience service interruption. People can call 811 to prevent these incidents, before they proceed with digging their property. Calling the 811 number will enable utility companies to come out and mark their respective utility lines.

But, despite the marks, there will sill be accidents. Utility lines are struck every 6 minutes, some place. Traffic lights, wastewater pipes, telecommunication lines, etc. are affected when lines are struck. These incidents affect public health and safety.

With the use of GPR or Ground Penetrating Radar, companies can locate utility lines. With this machine, companies can easily locate utility lines. Companies can locate their utility lines if any property owner calls 811.

Today, utility lines are marked with different colors for easy identification. The colors below indicate the kind of utility uses it.

White lines are for proposed excavation sites. You can mark areas with white lines that will soon be excavated.

Pink lines are temporary survey markings. These are used by surveyors to mark off legal property boundaries.

If you see red lines, then you can be sure that these are electric power lines, cable, conduit, and lighting cables. The color red is perfect for electric works because it is associated with fire and danger.

Lines for gas, oil, steam, petroleum, and gaseous materials use the color yellow. The bright color yellow is used to be a warning sign since a natural gas leak can create a potentially disastrous situation.

Orange lines are used for communication, alarm, signal lines, cable or conduit. Lines for potable water use blue lines. If you see purple lines, that this is for reclaimed water, irrigation and slurry lines. Sewer and drain lines use the color green. A project can be derailed for a long time when these utility lines are hit.

Click here now if you want to learn more about the color coding of utility lines. You can view here for more.