If You Read One Article About , Read This One

How to Find Hidden Piping and Valves

It is important that you know the details of your home like the back of your hand in case you are a homeowner. One of the things that is especially critical is finding hidden water as well as gas piping and valves and it is important to know where they are especially if you have to deal with things like an emergency. Some of the ways that you can be able to find out where the various shut off valves are located are briefly highlighted below.

There is a high probability that the the gas valves for your home will be located before the gas meter in case you have natural gas. Such nubs are usually rectangular in shape and usually use a wrench and gas companies do not recommend touching them. There is however a side valve that is usually located where the gas pipe first enters or much further down the line.

If you have a gas pipe then the valve will most likely be located in the utility room and will be made from flexible copper. Having such a piping usually means that you have a high-pressure gas system for your home. With the gas system, you are sure that you will find the shut off valve near the water heater or somewhere near the furnace.

There is a high chance that water valves usually have two shut off valves since one is located before the meter and the other located after the meter. In environments where it is really cold you are most likely to get the shut off points located in the house to prevent freezing. For milder climates, you are most likely to find out that the valves are located in an underground lid or box next to exterior.

Take time to look at property reports if you are finding it hard to locate water shut off valve since they are usually indicated in property reports given in the last phase of the property purchase. By looking at the report, it will be easy for you to be able to find out where the water shut off valve is located. Pictures of the valves will also be drawn so that you are able to know what they look like.

If you have an automatic sprinkler system then you are going to find that it is hard to locate it since most of them are usually located underground. By using a metal detector, you are sure that you will be able to find such valves since they are usually made up of metals. Even though such valves may not be located exactly where the plans says using the plans is something that will definitely help you to find out where you need to start.

Cited reference: check these guys out